Wireless Hub & Nodesfor up to 16 sensors
for up to 16 sensors
Enable wireless communication between your sensors and the base unit for a distance of up to 2km (1.2 miles).
Wirless Hub & Nodes specifications:
- communication protocol: LoRa point to point
- max distance with line of sight: 500m
- regulatory approval: FCC, CE
- multiple frequencies for different regions: EU868, US916
- support sensor nodes per wireless hub: up to 16
- wireless hubs per base unit: 1
- wide operational temperature: -40° to +85°C(-40º to +185F)
- 0U rack mountable
- DIN Rail mountable with optional DIN Clips
- metal steel enclosure
Nodes specifications:
- continuous power: 12v DC, 24v DC, 5v (USB-C)
- sensors support wireless node: 1
- communication protocol: LoRa point to point
- max distance with line of sight: 500m
- regulatory approval: FCC, CE
- multiple frequencies for different regions: EU868, US916
- support sensor nodes per wireless hub: up to 16
- wireless hubs per base unit: 1
- wide operational temperature: -40° to +85°C(-40º to +185F)
- 0U rack mountable
- DIN Rail mountable with optional DIN Clips
- metal steel enclosure
Nodes specifications:
- continuous power: 12v DC, 24v DC, 5v (USB-C)
- sensors support wireless node: 1
Upgrade from wired to wireless
By default our InfraSensing sensors are connected with a RJ45 cable to the base unit.
Any sensor can be converted into a wireless sensor with the optional Wireless Node (NODE-LW-1P). The sensor will then transmit over a wireless communication protocol the data a receiving unit (EXP-LWHUB). The EXP-LWHUB is connected to the base unit.
Any sensor can be converted into a wireless sensor with the optional Wireless Node (NODE-LW-1P). The sensor will then transmit over a wireless communication protocol the data a receiving unit (EXP-LWHUB). The EXP-LWHUB is connected to the base unit.
Wireless Hub
to connect your wireless sensors to the base unit
The Wireless Hub is an expansion hub for the Sensorgateway (base unit).
It connects to the base unit as a regular sensor. It manages the wireless communications between sensor and base unit, that normally use a wired communication.
The wireless protocol being used is LoRa which is a long range and low power communication protocol in the free spectrum.
Unlike LoRaWAN applications, this Hub is 100% on-premises. It is a point to point (P2P) wireless protocol.
It connects to the base unit as a regular sensor. It manages the wireless communications between sensor and base unit, that normally use a wired communication.
The wireless protocol being used is LoRa which is a long range and low power communication protocol in the free spectrum.
Unlike LoRaWAN applications, this Hub is 100% on-premises. It is a point to point (P2P) wireless protocol.
Wireless Node
making your InfraSensing sensors wireless
The Wireless Node (NODE-LW-1P) is an adapter that connects to any InfraSensing sensor.
Out of the box, sensors are connectt to and powered by the base unit.
With the wireless node, a sensor gets its power from the node. The node itself can get its power in multiple ways:
- 24v DC with a terminal block
- 12v DC with a barrel jack for an AC/DC adapter
- 5v DC with a USB-C connector
Each sensor that you want to be wireles needs a Wireless Node (NODE-LW-1P)
Out of the box, sensors are connectt to and powered by the base unit.
With the wireless node, a sensor gets its power from the node. The node itself can get its power in multiple ways:
- 24v DC with a terminal block
- 12v DC with a barrel jack for an AC/DC adapter
- 5v DC with a USB-C connector
Each sensor that you want to be wireles needs a Wireless Node (NODE-LW-1P)